How to

How to Fix a Car Charger Port?

How to Fix a Car Charger Port

How to Fix a Car Charger Port? Whether you’ve determined that the problem isn’t with what you’re plugging in, check to see if the fuse for the car’s power outlet has blown. The most likely explanation is a blown fuse in that circuit, either as a result of ageing or because whatever was previously installed was defective or drew too much current.

It may be difficult to repair a charging port on your own, but you can rely on professionals to fix your iPhone or Android phone correctly the first time. A replacement charging port will cost between $2 to $30, depending on the model and whether you obtain a standalone charging port or a flex cable/assembly.

Car charger ports can be damaged in numerous ways. If the wire has gotten loose, you can try to fix it yourself with simple tools like pliers. To do so, remove the broken plug, replace it, and check its security. You can also discover the damaged wires using a toothpick or knife. Then, using pliers, fuse the damaged wires. This will make them as strong as new. This procedure is an efficient and cost-effective way to repair a damaged car charging port.

How to Fix a Car Charger Port?

1. Fuses to Fix a Car Charger Port

If your automobile charging port has stopped working, the fuse may need to be replaced. A fuse is a simple, low-cost device that keeps the electrical system running smoothly. First, look in your owner’s manual for the fuse location. Then, as quickly as feasible, replace the old one. To save time, consider purchasing a backup fuse and using it as a guide to replace the old one. Backup fuses are typically only one or two bucks.

Try a different device or charger if the socket only works in one of the two sockets. If this fails, you’ll need to use a circuit tester. Place the tester on the socket’s outside rim, making contact with the centre pin. Check the fuse for any blown fuses next. Contact a professional electrician if you’re unsure of the cause.

If the fuse is not blown, inspect the socket for corrosion. If you notice any corrosion on the connection locations, the fuse has most likely blown. To clean the contact points, use a wire brush. After checking the fuse, replace it with a new one that matches the amperage.

Another typical issue with automobile charger ports is that the sockets easily snap. The simplest solution is to replace the fuses. If you don’t know anything about electronics, you might be better off hiring a mechanic. In a workshop, you may also double-check the 12V sockets to ensure they are properly connected.

A blown electrical fuse is responsible for 90% of all dead lighter sockets. While this is a simple remedy, it should be done with caution. Failure to do so may result in more electrical damage. You should also inspect the receptacle for debris, which can obstruct the cord connection.

2. Sanding

You can sand down the plastic covering on a car charger port to remove it. You’ll need fine-grit sandpaper for this. This will assist you in achieving a smoother finish. A dowel can also be used to hold the sandpaper while sanding.

Sanding a car charging port is simply provided with a few procedures are followed. To begin, you’ll need to utilise a sanding machine. It has a design that enables circular sanding. The goal of this procedure is to remove the topcoat, clearcoat, and base coat. Make sure you thoroughly follow the directions.

3. Superglue

If you can’t charge your phone through your car’s charger plug, superglue can come in handy. Wait for the super glue to cure before applying it to the fractured piece of the connector. Then, without using too much force, carefully remove the fractured section of the connector.

Superglue comes in two forms: liquid and gel. The liquid type is more effective at penetrating cracks. It also dries faster than gel. Gel variants form a more flexible connection and are less likely to drip. Loctite makes a variety of super glues. Dr Harry Coover invented superglue while working on transparent plastics during WWII.

Use a special-purpose superglue, such as those designed expressly for underwater purposes. Water and heat weaken regular superglues, so choose an appropriate type. Also, make sure you’re using an official medical-grade superglue rather than one from a hardware shop.

Liquid electric tape is another viable approach. This mixture can be combined with silver or copper powder. This prevents the glue from breaking when pulled. It can even be used to repair broken handle pieces. It can also be used to repair work boots’ soles. Even after prolonged exposure to heat, the German-made adhesive will remain strong and will not split.

Another technique for repairing a damaged automobile charger port is to use super glue. It is a strong and fast-bonding substance that may solve a variety of typical challenges. And because it dries rapidly, you don’t have to worry about it causing finger injuries. After it has dried, apply a small amount to the damaged area and smooth it with a file.

4. Sanding Block

There are several methods for repairing a car charging port. Refinishing the port using a sanding block is one option. The sanding block will level out any rounded openings in the port. This is a simple approach to save money by not purchasing a new one.

A 3M sanding block is an excellent choice. This tool is composed of malleable rubber to aid in sanding outcomes. Internal pins are used to keep the sandpaper flat against the automobile surface.

Another option is to use a 2-3/4X7 3/4 Hookit II Hand Block. It is a solid plastic block with a loop face for easy removal. This block is compatible with PSA abrasives. It is also useful for levelling the repair area.

5. Dead Cigarette Lighter Fuse to Fix a Car Charger Port

If you’ve observed that your car charger port isn’t working, it’s time to check the cigarette lighter fuse. You may check whether your cigarette lighter is operating by identifying the fuse type in your owner’s manual. You can also use a multimeter to test the fuse. If the metre beeps or lights, you’ve most likely blown a fuse. If this is the case, replace the fuse with the one specified in the owner’s manual.

Changing the fuse will solve most socket problems, but it may not be the best option. It is occasionally required to replace the receptacle as well. The voltage rating of the receptacle will be displayed. This voltage is typically 12 volts, but you can test it using a multimeter. A dead socket could be caused by defective computer codes in your vehicle, in addition to the fuse.

Typically, a cigarette lighter socket is positioned on the driver’s side of the dashboard. Some vehicles feature additional power outlets in the centre and rear consoles. If your car charger port is not functioning properly, try connecting the cord to other outlets. When the cord is inserted into other outlets, the socket should show electricity. If the socket is still dead, you’ll need to look into it further.

When the cigarette lighter fuse blows, replacing it yourself might be dangerous. Furthermore, a blown fuse can harm your car’s electrical system, leaving you stranded. Joining roadside assistance services like Jerry’s is a great way to avoid this. These memberships enable access to a nationwide network of over 55,000 service providers. These policies may be purchased for as little as $4.16 per month and cover a wide range of roadside emergencies.

Also Read: How to Fix Car Cigarette Lighter?

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button