
How to Fix Car Door Handle? If you’ve had your car for a long, you probably don’t give much thought to the door handle – until one day you grab it to get in and it feels “odd.” You can’t put your finger on it, but it simply doesn’t feel right. The handle appears to function, but the door remains closed.
Naturally, you try the key or the remote a few times, but it doesn’t seem to work – you appear to be locked out of your own automobile. You try the other or back door, and it works. Great! You can get inside your automobile, but you must climb over the centre console or even the rear seat to do so! It’s humiliating at best and nearly impossible at worst, but at least you can hop in your car and drive home.
The driver’s door handle isn’t always the first to go; occasionally it’s the inner door handle, but since that’s the door that gets the most use, that’s frequently the case. Most of these handles are made of plastic or cheap cast metal, and after a certain number of operations, the business end, the portion you can’t see, cracks and finally snaps off.
The driver’s door handle isn’t always the first to go; occasionally it’s the inner door handle, but since that’s the door that gets the most use, that’s frequently the case. Most of these handles are made of plastic or cheap cast metal, and after a certain number of operations, the business end, the portion you can’t see, cracks and finally snaps off.
Requirement
- Replacement Handle
- Screwdrivers
- Towel
- Masking Tape and Marker
How to Fix Car Door Handle?
Here is the step-by-step guide to Fix Car Door Handle:
1. Find A Replacement Handle

Make sure you know the specific model, year, and make before looking for a replacement handle. Keep in mind that no car handle is universal or may be used on every vehicle.
Check with your dealer, resellers, or scrap yards for parts that are similar to your vehicle. If you’re lucky, you might come across a comparable automobile in a scrapyard; remove all of the handles so you don’t have to worry about future supply.
2. Remove Inner Door Panel to Fix Car Door Handle

Before removing your door panel, take a thorough look at it and possibly snap a photo of it. Lay down any plastic coverings that protect the bolts and screws on the towel. Unscrew everything that needs to be removed one at a time, taking care to name each one.
When dealing with cars that use plastic clips instead of screws, remember to use delicate force when removing the panel. Plastics might become brittle over time, so avoid breaking any internal cuttings.
3. Remove Waterproofing Paper
Because the automobile door handle is prone to dampness and water seepage, certain car models include waterproofing paper. This substance prevents any potential water seepage from damaging the door panel’s inside latches and components. Remove the material before working to ensure that it is not damaged and that it can be easily retrieved after the handle is replaced.
4. Remove The Connections to Fix Car Door Handle

Take a close look at the connections now that you’ve removed the door panel. If necessary, take a snapshot to check that the connections are properly reassembled. As you disconnect the connections, pay close attention to labelling each rod and related piece to avoid confusion later on. However, if you were able to obtain a copy of the door handle assembly manual, use it as a reference.
5. Replace The Handle

Clean the internal edges and insert the replacement handle. Check that it is installed correctly; refer to the photo you took before disassembly, and carefully reassemble the connections taken from the new replacement handle. Keep in mind that a single screw can have an impact on the car’s performance and locking function.
6. Check Door For Proper Operation

Check the new mechanism to see if the locks and latches work properly. Before reattaching the inside panel, test it many times to ensure there are no defective connections or loose mechanisms. Do not just replace the inner door handle; also check to see if the outer handles work. We frequently focus on what is being repaired and overlook the other half, test the exterior and ensure the latch works perfectly in conjunction with the inner door handle.
7. Re-Assemble The Interior Panel
After you’ve tested your replacement handle and ensured it’s robust and firmly attached, it’s time to replace the door’s the inside panel. Depending on the model of your automobile, you may need a towel and a rubber mallet to secure everything.
Return all of the screws located on the panel surface, including the rubber covers. If your car has plastic clips instead of screws, use a cloth to absorb the impact of the rubber mallet so that the interior of the door is not damaged.
Conclusion
An automobile is like a family member; you love and care for it in exchange for the ability to travel without having to commute. Replacing a car door handle may appear to be a difficult task, but it is a vital skill that will save you money.
Also Read: How to Fix Headliner in Car?