How to

How to Fix a Squeaky Car Window?

How to Fix a Squeaky Car Window? Do you have a car that makes a squeaking sound when you open or close the window? It’s one of those sounds that seem to echo throughout the vehicle and can be really irritating. Even if the rest of your car is in fantastic shape, a squeaky window can make it feel like it’s falling apart, which can be quite annoying, and there may appear to be nothing you can do about it. However, in most circumstances, the problem is rather simple to resolve! In this blog post, we’ll go over the most prevalent causes of a squeaky car windows and suggest some options for fixing them.

How to Fix a Squeaky Car Window?

  1. Spray the moly lubricant inside the seal on both sides of the window frame while the vehicle’s window is fully open. Begin with the left side of the window. Starting at the top of the window frame, spray the moly lubricant into the rubber seal and work your way down. Some of the surpluses will fall within the seal, which is acceptable.
  2. Rep to the previous steps on the right side of the same window. Make sure the lubricant is evenly dispersed all the way down the vertical frame of the window, all the way to the bottom corner of the seal. Wipe the rag around the window seal, door frame, and automobile body.
  3. Wait a few moments before rolling up the window. Allow the glass to rise and fall two or three times to ensure that the silicone grease penetrates the track. The squeaky sound should get better with practice.
  4. If the squeak isn’t totally gone, you can spray more silicone lubricant into the window seal with the glass all the way up, which will help distribute the lubrication down into the components inside the car door.
  5. Steps 1 through 4 should be repeated until your automobile window is totally squeak-free.

Keep a rag nearby to wipe away any excess lubricant spray on the exterior of the window seal, door frame, or car body. Avoid getting silicone oil into the bottom horizontal area of the window frame because this can generate streaky glass and make cleanup more difficult.

Clean Up

This procedure is simple to clean up after. Wait at least a few hours to allow the lubricant to completely dry. To begin, wipe all around the rubber seal of the car window and anywhere else you find residual silicone lubricant with paper towels or a rag. After that, dip your index finger into the rag and clean the lowest horizontal area of the window frame. Press your finger as deep as possible into the seal. Finally, clean the glass with a paper towel and a simple glass cleaner.

Conclusion

I just explained how to stop a car window from squeaking. I also provided step-by-step instructions for completing the project and explained how your window works. Explore the remainder of my blog if you wish to troubleshoot other areas of your automobile or if you have any questions. I post information virtually every day, so check back frequently for fresh instructions. Also, have a look at my expert-recommended auto goods to see if they can make your life a bit easier.

Also Read: How Much Does It Cost to Fix a Car Window That Won’t Roll Up?

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button